Disclosure: this article contains Amazon affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
A head shave starts with choosing a tool you can control around a curved surface. The HeadBlade ATX Razor uses a finger ring and wheels; a conventional razor and an electric shaver need their own handling routines.
This guide focuses on the HeadBlade ATX Razor and Cremo Original Shave Cream, using their makers’ handling and product instructions. Start with the handle and cream instructions, then work through the routine at a pace you can control.
Choose the Shaving Tool
The HeadBlade ATX Razor is a finger-mounted razor. The maker’s HeadBlade’s getting-started instructions distinguish the ATX’s wheels from the MOTO’s ball. Both use the finger as part of the handle, but that does not make their moving parts identical.
What Belongs in the Kit
For the ATX route, have the HeadBlade ATX Razor and its correct cartridge ready before starting. HeadBlade’s instructions show the ring, the forward-facing wheels and the way the razor follows the head. Read those directions before trying to improvise the grip.
Cremo Original Shave Cream is the cream option linked in this guide. Cremo describes a thin coating on wet skin, with water added as needed to keep it slippery. That is a different application from building a thick brush lather.
A post-shave product is a separate choice from the shaving cream. Follow the label on Nivea Men Sensitive Post Shave Balm if you choose it, and keep it separate from the razor-cleaning supplies.
Check Cremo Original Shave Cream
Check Nivea Men Sensitive Post Shave Balm
Preparation and Cream
HeadBlade’s shaving guide recommends washing with warm water before shaving. Fit the correct cartridge to the HeadBlade ATX Razor and keep water and cream within reach before you start.
Follow Cremo’s product instructions when using Cremo Original Shave Cream. The maker says to wet the skin, apply an almond-sized squeeze as a light coating and add water as needed. More cream is not a substitute for following the label.
Handling the HeadBlade ATX
HeadBlade’s getting-started instructions say to put the middle finger in the ring of the HeadBlade ATX Razor and keep its wheels facing forward. Check the suspension and pivoting head for the right pressure and angle before shaving.
The HeadBlade ATX Razor is not a tool to rush around a corner you cannot see or feel confidently. HeadBlade’s guide calls for short, steady strokes and regular rinsing. Keep checking the tool’s position instead of forcing a long pass across the whole head.
A second pass is not a requirement. With Cremo Original Shave Cream, add water as needed to keep the cream slippery. HeadBlade emphasizes taking it slowly; stop if you cannot use the tool comfortably instead of forcing a closer result.
Finishing the Routine
Keep the rinse, the razor cleanup and any post-shave product as separate steps. If you choose Nivea Men Sensitive Post Shave Balm, follow its label rather than using it as a razor cleaner.
Frequency and Cartridge Replacement
Choose whether you want the look of a close shave or some regrowth. Keep the HeadBlade ATX Razor clean and dry for the next time you want that finish; choose the timing by your own hair and preference.
For the HeadBlade ATX Razor, use the compatible cartridge and the maker’s replacement guidance. Check the cartridge before each use and replace damaged parts instead of trying to reach a target shave count.
Check the Result
Check for missed hair deliberately when using the HeadBlade ATX Razor. If reaching an awkward patch would mean forcing the handle or repeating passes you cannot control, leave it rather than chase a completely uniform finish.
Keeping the Tools Ready
HeadBlade’s shaving guide says to dry the razor and store it where it will not get wet. Do not leave the HeadBlade ATX Razor sitting in a wet shower between uses.
Store Cremo Original Shave Cream according to its label, with the cap closed. Use the product instructions and packaging condition when checking whether the tube is still usable. Keep refills and small parts organized so you can identify the correct replacement.
FAQ
Do I need a head-specific razor? The HeadBlade ATX Razor is designed around a finger ring and wheels. It is one handling option, not proof that every conventional razor is unsuitable. Compare the grip and the exact maker instructions.
Must I make a second pass? Assess the result before repeating a pass with the HeadBlade ATX Razor. Follow the handle and cream instructions; a second pass is a choice, not a required step.
Does the same routine work for an electric shaver? Not automatically. Cremo Original Shave Cream is linked here for the wet-razor routine. Wet/dry operation, compatible products and cleaning methods depend on the exact electric shaver and its manual.
How long will it stay smooth? The HeadBlade ATX Razor does not determine your regrowth rate. Judge the look you want rather than setting a fixed calendar for everyone.
Watch the Head-Shaving Demonstration
Video credit: Believer Barber, How to Shave Your Head Perfectly Bald, via YouTube. The maker instructions linked above are the source for the tool-specific directions in this guide.
