As an Amazon Associate, TrustedBarber earns from qualifying purchases.
The new Andis Lync blades flip the usual upgrade path: instead of buying a new tool to get a better blade, you buy the blade and it runs on the tools you already own. Andis has been building the Lync system out through fall 2026, and the newest pieces, the DeepV and DeepV Slim trimmer blades, are showing up at dealers now alongside the LYNC GTX-Z trimmer blade and the AMP’D clipper blades.
The idea behind Lync is simple. Andis changed the screw-hole spacing on its replacement blades so one blade pattern fits several tools, both Andis models and select competitor trimmers and clippers. The company’s tagline for the system is “choose your blade, not the tool.” In practice that means a barber who likes a certain blade geometry can carry that geometry across a drawer full of tools instead of being locked to one housing.
This guide walks through the whole Lync lineup as it stands in November 2026: the three trimmer blades (GTX-Z, DeepV, DeepV Slim), the two AMP’D clipper blades (Recon and Phenom), the matching attachment combs, which tools each blade fits, what the M-Force magnetic design changes in hand, and what the whole system costs.
Quick picks
Check Andis LYNC GTX-Z Blade Price on Amazon
In this guide
Quick answer
Lync is Andis’s cross-compatible blade system. By re-spacing the screw holes on its replacement blades, Andis made one blade fit several tools, so a GTX-Z detail blade can move between an Andis Slimline Pro, a Slimline Pro II, a Phenom and select competitor trimmers, with a spacer bar bridging the gap where hole spacing differs.
If you detail on a Slimline Pro or a Phenom trimmer, the GTX-Z Lync blade is the easiest first buy, because it needs no spacer on either tool and ships zero-gapped. If you cut bulk on a clipper, the AMP’D Recon blade covers the Recon clipper with an audible-crunch cutting feel Andis built the AMP’D line around.
What the Lync system is
Blade compatibility used to be the most frustrating part of buying replacement blades. A T-blade that fit one trimmer would not bolt onto a cousin model, because the two screw holes sat a millimeter apart. Andis’s answer with Lync is to optimize the hole spacing on the blades themselves so one blade pattern lines up with multiple tool bodies. Where the spacing still differs, the blade ships with a spacer bar that adapts the mount.
Andis describes the result as letting you “upgrade the blades you use without replacing the tools you already trust.” For a working barber that has two practical effects. First, a blade preference becomes portable: if you cut with a deep-tooth geometry, you can put that geometry on every compatible tool on your station. Second, replacement-day math gets simpler, because one blade stock covers several machines instead of one.
The system splits into two families. The trimmer blades (GTX-Z, DeepV, DeepV Slim) are fixed blades for detail work, lineups and ultra-fine passes. The AMP’D clipper blades (Recon and Phenom) are detachable-style clipper blades built for bulk removal, clipper-over-comb and blending. A set of single magnet attachment combs ties the clipper side together.
The Lync trimmer blades: GTX-Z, DeepV, DeepV Slim
LYNC GTX-Z trimmer blade (#564396)
The GTX-Z is the detail specialist of the launch lineup and the one most barbers will recognize by name. Andis built it on the company’s M-Force technology, a patented magnetic, springless blade design that Andis says keeps tension consistent across the entire blade for more cutting power. The deep-tooth geometry feeds more hair between detail passes, and the blade ships zero-gapped for precision detailing right out of the box.
Andis pitches the GTX-Z for sharp lines and ultra-fine detailing, and the compatibility list is the widest of the Lync trimmer blades: it fits the Andis Phenom, Slimline Pro and Slimline Pro II natively, and with the included spacer bar it also mounts on select BaByliss and TPOB trimmers. On Amazon the Andis 564396 LYNC GTX-Z M-Force Trimmer Blade lists with the spacer included, so a Slimline Pro-to-BaByliss FX swap is a blade purchase, not a tool purchase.
Check Andis LYNC GTX-Z Blade Price on Amazon
DeepV trimmer blade (#563097)
The DeepV is the newest general-purpose detail blade in the system. Andis’s listing describes it as built for clean lines, everyday detailing and efficient hair removal, again on the M-Force magnetic, springless design, with the deep-tooth pattern feeding more hair to keep a detailing workflow moving. Compatibility matches the rest of the trimmer family: Andis Slimline Pro, Slimline Pro II and Phenom, plus select competitor trimmers.
The DeepV sits between the GTX-Z and the DeepV Slim in intent. Where the GTX-Z is angled at sharp-line specialists and the Slim at tight-area work, the DeepV is the everyday blade: lineups, beard edges, necklines and general detailing on any compatible trimmer. Think of it as the blade most barbers will run most days, with the other two as specializations.
DeepV Slim trimmer blade (#563098)
The DeepV Slim takes the DeepV geometry and narrows it. The slim profile is designed to reach the areas a full-width blade struggles with: tight corners around the ear, the temple point, behind the ear and inside a beard line where a wide blade bridges over the detail instead of cutting it. Andis’s listing calls it optimized for ultra-fine detailing and navigating tight areas with confidence, on the same M-Force magnetic, springless platform.
If your detailing work is mostly lineups at the mirror, the full DeepV covers more area per pass. If your work lives in corners, around piercings, behind the ear and along hard beard lines, the Slim earns its place. Both new blades fit the same tool list as the GTX-Z, so a three-blade rotation on one trimmer is a realistic setup.
The AMP’D clipper blades and combs
AMP’D Recon clipper blade (#564793)
The AMP’D clipper blades are where the system gets loud, literally. Andis built them around an audible “crunch” feedback: a 28-tooth cutter with a one-pass cutting feel, a thinner cutting blade and a deeper grooved stationary blade that together give the cut a sound and feel Andis says professionals can hear and verify. Each blade includes both the cutter and the stationary blade, so a swap refreshes the whole cutting surface.
The Andis 564793 LYNC AMP’D Recon Replacement Blade is cut for the Recon clipper and spans the full workday jobs: bulk removal, clipper over comb and detailing, with an adjustment range from 0000 to A for close control. That span matters in practice, because it lets one blade move from debulking into blending without a blade change mid-service.
Check Andis LYNC AMP’D Recon Blade Price on Amazon
AMP’D Phenom clipper blade (#564795)
The Andis 564795 LYNC AMP’D Phenom Detachable Blade carries the same 28-tooth, crunch-feedback design and the same 0000-to-A adjustment range, cut for the Phenom clipper family. Andis positions it for high-volume workflows where a blade refresh needs to be quick between clients, which is exactly what a two-piece cutter-and-stationary swap is for.
Which of the two you buy is decided by the clipper on your station, not by the blades: Recon clipper takes the Recon blade, Phenom clipper takes the Phenom blade. The geometry and cutting character are the same, so the choice is about the tool body you already own.
Check Andis LYNC AMP’D Phenom Blade Price on Amazon
LYNC single magnet attachment combs (#564994)
Tying the clipper side together, Andis makes a set of single magnet attachment combs that fit the Recon and Phenom AMP’D blades. The set spans the everyday cutting lengths: #0.5 at one-sixteenth of an inch, #1 at an eighth, #2 at a quarter, #3 at three-eighths and #4 at a half inch. The magnet mount is designed to attach securely for safe, accurate cutting and consistent lengths across the range.
The combs were not listed on Amazon at publication, so check Andis.com or your barber supplier if you want them with the blades. They are worth planning for, because a new AMP’D blade with no combs limits you to freehand and clipper-over-comb work until the guards arrive.
Which tools take Lync blades
Compatibility is the whole point of Lync, so it is worth being precise. Andis publishes a compatibility chart with the GTX-Z blade, and the same tool list carries across the trimmer family.
Andis tools:
- Phenom trimmer: fits, spacer required
- Slimline Pro II: fits, no spacer required
- Slimline Pro: fits, no spacer required
Competitor trimmers (with the included spacer bar):
- BaByliss Dual Coil: spacer required
- BaByliss LoPro: spacer required
- BaByliss FX and FX One: spacer required
- TPOB X and XO: spacer required
- TPOB Play: slim blade only, no spacer required
Two practical notes from that chart. First, if you run Andis Slimline tools, every Lync trimmer blade bolts on with no adapter, which makes a Slimline the cheapest way into the system. Second, the spacer bar is included with the blade, so there is nothing extra to buy for a BaByliss or TPOB mount, but you should keep track of it, because a lost spacer takes the cross-compatibility with it.
On the clipper side, the AMP’D blades are tool-specific by design: the Recon blade fits Recon clipper heads and the Phenom blade fits Phenom heads. The Lync flexibility story on the clipper side is about keeping the blade system current across those two platforms rather than swapping between brands.
What Lync blades cost
Lync pricing is consistent across the lineup. The GTX-Z trimmer blade and both AMP’D clipper blades sit right around the fifty dollar mark at Andis and at major Amazon and barber supply listings, and the DeepV and DeepV Slim are listed in the same range at the dealers carrying them. That puts a Lync blade in the same price band as Andis’s premium replacement blades, which is fair for blades that include a two-piece cutter set or a spacer bar where needed.
Blade prices do move with sales, and barber supply houses run seasonal discounts on Andis product regularly, so it is worth comparing before you buy. If you already own two compatible tools, one blade can serve both, which is where the system starts paying for itself.
Should you switch to Lync?
The honest answer depends on what is on your station today. If you run a Slimline Pro or Slimline Pro II, Lync is close to a free upgrade path: every trimmer blade in the system bolts on with no spacer, and you can rotate GTX-Z for lineups, DeepV for everyday detail and DeepV Slim for corners without touching another tool.
If you run a BaByliss FX or a TPOB trimmer, Lync is more interesting than it first looks, because the spacer-included blades let you run Andis geometry on a competitor tool body. Whether that beats your current blade is a feel question, but it is now a purchase you can actually make instead of a forum debate.
If your main tool is a clipper, the AMP’D blades make sense when you already run a Recon or Phenom clipper and want the crunch-feedback cutting feel with a full cutter-and-stationary refresh in one part. If you own neither clipper, the blades alone will not help you, and you would be shopping clipper first.
Who should wait: barbers happy with their current blade ecosystem who own none of the listed tools. The Lync system will still be there in six months, and blade lineups at dealers tend to deepen over a product’s first year, not thin out.
FAQ
Do Andis Lync blades fit my existing trimmer?
If your trimmer is an Andis Phenom, Slimline Pro or Slimline Pro II, yes. Phenom mounts need the included spacer bar; both Slimline models bolt on without one. On select competitor trimmers (BaByliss Dual Coil, LoPro, FX and FX One, and TPOB X and XO), the included spacer bar adapts the mount. The TPOB Play takes the slim blade without a spacer.
Are the Lync blades available on Amazon?
Three of them are as of publication: the GTX-Z trimmer blade and both AMP’D clipper blades are in stock on Amazon. The DeepV and DeepV Slim trimmer blades were not listed on Amazon yet, so those two come from Andis.com or barber supply dealers for now.
What does the spacer bar do?
It adapts the blade’s screw-hole spacing to a tool whose mount holes sit at a different distance. The blade ships with the spacer included, and Andis publishes assembly instructions for it, so the swap is a screwdriver job rather than a modification.
Can you zero-gap a Lync blade?
The GTX-Z ships zero-gapped according to Andis’s listing, so no initial adjustment should be needed for detail work. For anything beyond that, it is worth reading the risks first: zero-gapping changes blade exposure, and pushing a blade closer than it was designed to sit can snag skin. Our guide on how to zero-gap clipper blades covers what the practice does and when it goes wrong.
What is M-Force?
M-Force is Andis’s patented magnetic blade technology with a springless design. Instead of a mechanical spring setting blade tension, the magnetic system holds consistent tension across the blade, which Andis says delivers a consistent feel in hand and more cutting power. It is the platform under every trimmer blade in the Lync family.
Verdict
The Lync system is Andis applying a simple, overdue idea to replacement blades: the blade you like should not be chained to the tool you bought it with. The execution looks right so far. The trimmer blades share one compatibility list, the spacer bar ships in the box where spacing differs, and the AMP’D clipper blades carry a distinct cutting character with a full two-piece refresh per swap.
Start with the GTX-Z trimmer blade if you detail on a Slimline or Phenom trimmer, since it needs no spacer on the Andis tools and covers the sharpest-line work in the lineup. Blades are the cheapest way to change how a tool cuts, and Lync just made that change portable.
Clipper stations get the matching AMP’D Recon or AMP’D Phenom blade, one per clipper family. Watch for the DeepV and DeepV Slim to reach Amazon in the coming months if Amazon is where you buy parts; until then they are a dealer purchase.
For more on keeping whatever blade you run cutting the way it should, see our guides to clipper blade care and how to sharpen clipper and trimmer blades at home.
